Click Here To Activate

 
Site Search


click for larger view


DF33SMS

1/3 HP Job-Ready, Pre-Assembled Back-Up and Primary System


F33S Included - 1/3 HP - Max Flow 68 GPM: 60 GPM @ 5’


CONSTRUCTION

Assembled in the US with foreign and domestic parts
Tested to 1 million cycles*(Primary only)
• Cast Iron Pump Housing/Base withTop Suction Intake to Filter Debris and Minimize Clogging
• Corrosion-Resistant Thermoplastic  Engineered Flow Divertor, for Switch Protection
• Stainless Steel Upper and Lower Float Guard and Float Guide
• Corrosion-Resistant Thermoplastic Impeller for Maximum Water Flow, and Long Life in Tough Sump Applications.
• 1-1/2 in. NPT Discharge for Easy Installation and Compliance with Building Codes
• Engineered to Pass Up to 1/2 in. Solids
• For Use In 11 in. Diameter or Larger Sump Basins
• 10 ft. SJTW Power Cord
SWITCH
• Two-Pole Snap-Action Integrated Mechanical Float Switch
• ON @ 9 in. / OFF @ 4 in.
SEALS
• Carbon / Ceramic Shaft Seal for Maximum Life
MOTOR
• 120 Volt, PSC Oil-Filled Motor
• Upper and Lower Ball Bearings for Smooth, Quiet Operation and Long Life
• Continuous Duty Capability
• Low Amp Draw for Maximum Switch Life
 
DF12VSM Included - 12 VDC - Max Flow 55 GPM: 47 GPM @ 5
CONSTRUCTION
• Microprocessor Controller Self Tests the Battery Status,Float Switch and Pump Operation Every 7 Days and Sends Voice Alerts in advance of a Problem.
• Fully Submersible Back Up Pump, For An Easy Addition To Any Sump System
• Auto Dialer Notification Calls up to Five Telephone Numbers You Program in to Alert The Home owner to a Problem Before Flooding Occurs(Auto-Dialer Requires Standard Telephone Service, a Landline or Digital Telephone Service Like DSL or Cable Telephone, Product Will Not Work With a PBX or Ethernet Phone System)
• Includes Connection Port for 3rd Party Security System Notification
• Corrosion-Resistant Thermoplastic Construction for Long Life in Tough Sump Applications
• Corrosion-Resistant Thermoplastic Impeller for Maximum Water Flow
• Protective Battery Case Included with LCD Screen Display
• 1-1/2 in. NPT Discharge for Easy Installation and Compliance with Building Codes
• For Use In 14 in. Diameter or Larger Sump Basins
SWITCH
• Dual Float Switch with Float Cage for Added Protection
• ON / OFF Levels are User Adjustable
MOTOR
• Powerful 12 VDC Motor, with PumpingCapacity that NearlyMatches an AC Powered Pump
• Requires One 75 Amp or 40Amp Battery for Operation. (See Accessories Section)
 
* WAYNE Water Systems’ Exceed an Average 1 Million Test Cycles. 
 
WAYNE Water Systems is proud to report that our pumps have exceeded an average life of 1 million pumping cycles during rapid cycle test conditions. The testing was conducted by a nationally recognized, independent accredited testing laboratory and the results were subsequently analyzed by an independent, world renowned, reliability expert who specializes in failure analysis. The rapid cycle testing was conducted using a statistically significant sample size of 1/2 HP submersible sump pumps. Note: a highly accelerated test such as this may or may not reflect actual conditions that the homeowner would experience.

 


Product Downloads


Performance
Discharge Head 5' 10' 15' 20'
Gallons/Minute 60 48 36 14