F100SSn
The F100SSn is a “Basement Protection System” Combination Stainless Steel Back Up and Primary System. This 1 HP and 12 VDC is Ultra Quiet and Come Pre-Assembled so it is Easy to Install!
FEATURES / BENEFITS
CONSTRUCTION
- F100SSn Included - 1 HP - Max Flow 102 GPM: 91 GPM @ 5’
- Assembled in the US with foreign and domestic parts
- Both Pumps Have Cast Iron Pump Housing/Base with Top Suction Intake to Filter Debris and Minimize Clogging
- Stainless Steel Upper and Lower Float Guard and Float Guide
- Corrosion-Resistant Thermoplastic Impeller for Maximum Water Flow, and Long Life in Tough Sump Applications
- 1-1/2 in. NPT Discharge for Easy Installation and Compliance with Building Codes
- For Use In 16 in. Diameter or Larger Sump Basins
- 8 ft. SJTW Power Cord
SWITCH
- Two-Pole Snap-Action Integrated Mechanical Float Switch
- ON @ 9 in. / OFF @ 4 in.
- Reliable Reed Float Switch with Float Cage for Added Protection
SEALS
- Carbon / Ceramic Shaft Seal for Maximum Life
MOTOR
- 120 Volt, PSC Oil-Filled Motor
- Upper and Lower Ball Bearings for Smooth, Quiet Operation and Long Life
- F12Vn Included - 12 VDC - Max Flow 48 GPM: 36 GPM @ 5’ CONSTRUCTION
- Fully Submersible Back Up Pump, for An Easy Addition To Any Sump System
- Stainless Steel Construction for Long Life in Tough Sump Applications
- Corrosion-Resistant Thermoplastic Impeller for Maximum Water Flow
- Protective Battery Case Included with LED Display and Audible Alarm to Let Homeowner Know There’s a Problem
- 1-1/2 in. NPT Discharge for Easy Installation and Compliance with Building Codes
- Powerful 12 VDC Motor, with Pumping Capacity that Nearly Matches an AC Powered Pump
Performance
| Primary 1 HP | |||||
|---|---|---|---|---|---|
| Discharge Head | 0' | 5' | 10' | 15' | 20' |
| Gallons/Minute | 102 | 91 | 85 | 76 | 64 |
| Back Up 12 Volt | |||||
| Discharge Head | 0' | 5' | 10' | 15' | 20' |
| Gallons/Minute | 48 | 36 | 25 | 14 | 0 |
