F50SSn
The F50SSn is a “Basement Protection System” Combination ALL CAST IRON Back Up and Primary System. This 1/2 HP and 12 VDC is Ultra Quiet, Tested to 1,000,000 Cycles, and Come Pre-Assembled so it is Easy to Install!
FEATURES / BENEFITS
CONSTRUCTION
- F50SSn Included - 1/2 HP - Max Flow 85 GPM: 75 GPM @ 5’
- Assembled in the US with foreign and domestic parts
- Tested to 1 million cycles* (Primary only)
- Both Pumps Have Cast Iron Pump Housing/Base with Top Suction Intake to Filter Debris and Minimize Clogging
- Corrosion-Resistant Thermoplastic Engineered Flow Divertor, for Switch Protection
- Stainless Steel Upper and Lower Float Guard and Float Guide
- Corrosion-Resistant Thermoplastic Impeller for Maximum Water Flow, and Long Life in Tough Sump Applications
- 1-1/2 in. NPT Discharge for Easy Installation and Compliance with Building Codes
- For Use In 16 in. Diameter or Larger Sump Basins
- 8 ft. SJTW Power Cord
SWITCH
- Two-Pole Snap-Action Integrated Mechanical Float Switch
- ON @ 9 in. / OFF @ 4 in.
- Reliable Reed Float Switch with Float Cage for Added Protection
- ON / OFF Levels are User Adjustable
SEALS
- Carbon / Ceramic Shaft Seal for Maximum Life
MOTOR
- 120 Volt, PSC Oil-Filled Motor
- Upper and Lower Ball Bearings for Smooth, Quiet Operation and Long Life
- Low Amp Draw for Maximum Switch Life
- F12Vn Included - 12 VDC - Max Flow 48 GPM: 36 GPM @ 5’ CONSTRUCTION
- Fully Submersible Back Up Pump, for An Easy Addition To Any Sump System
- ALL Cast Iron Construction for Long Life in Tough Sump Applications
- Corrosion-Resistant Thermoplastic Impeller for Maximum Water Flow
- Protective Battery Case Included with LED Display and Audible Alarm to Let Homeowner Know There’s a Problem
- 1-1/2 in. NPT Discharge for Easy Installation and Compliance with Building Codes
- For Use In 14 in. Diameter or Larger Sump Basins
- Powerful 12 VDC Motor, with Pumping Capacity that Nearly Matches an AC Powered Pump
- * WAYNE Water Systems’ Exceed an Average 1 Million Test Cycles.
- WAYNE Water Systems is proud to report that our pumps have exceeded an average life of 1 million pumping cycles during rapid cycle test conditions. The testing was conducted by a nationally recognized, independent accredited testing laboratory and the results were subsequently analyzed by an independent, world renowned, reliability expert who specializes in failure analysis. The rapid cycle testing was conducted using a statistically significant sample size of 1/2 HP submersible sump pumps. Note: a highly accelerated test such as this may or may not reflect actual conditions that the homeowner would experience.
Performance
| Primary 1/2 HP | |||||
|---|---|---|---|---|---|
| Discharge Head | 0' | 5' | 10' | 15' | 20' |
| Gallons/Minute | 85 | 74 | 64 | 51 | 34 |
| Back Up 12 Volt | |||||
| Discharge Head | 0' | 5' | 10' | 15' | 20' |
| Gallons/Minute | 48 | 36 | 25 | 14 | 0 |
