T75DSE
The T75DSE is our 3/4 HP Submersible All Cast Iron Effluent Pump. This pump moves MAXIMUM water thanks to it’s industry first DUAL SUCTION IMPELLER! Plus its The Hardest Working Pump, You’ll Never Hear.™
PERFORMANCE
- T75DSE - 3/4 HP - Max Flow 7000 GPH: 6300 GPH @ 5’
CONSTRUCTION
- Assembled in the US with foreign and domestic parts
- Cast Iron Pump Housing and Base with Dual Suction Design
- Top Suction (above imepller) Eliminates the Risk of Air Locks and Suction Screen Filters Debris and Minimizes Clogging
- Bottom Suction (Below the Impeller) Passes Up to 1/2 in. Solids and Filters Debris Through the Heavy-Duty, Cast Iron, Multi-Ring Strainer Base, to Reduce Clogging - Corrosion-Resistant Dual-Function Impeller for Maximum Performance, and Reliability
- Centrifugal Designed Top Portion of the Impeller, for Ultimate Water Flow
- Vortex Design Bottom Half of the Impeller, for Quick Passing of Solids - Recommended for Use in 14 in. Diameter or Larger Effluent Tanks
- 20 ft. Water Resistant, Field Replaceable, SJTW Power Cord
SWITCH
- Piggy-Back Tether Float Switch for Automaticor Manual Operation
- ON @ 7 in. / OFF @ 3 in.
SEALS
- Carbon / Ceramic Shaft Seal for Maximum Life
MOTOR
- 120 Volt, PSC Oil-Filled Motor
- Upper and Lower Ball Bearings Minimize Vibration for Ultra-Quiet Operation. The Hardest Working Pump You'll Never Hear™
- Continuous Duty Capability
- Low Amp Draw, Extends Switch Life
- 3 YEAR LIMITED WARRANTY
Performance
| T75DSE Flow Performance | |||||
|---|---|---|---|---|---|
| Discharge Head | 0' | 5' | 10' | 15' | 20' |
| Gallons/Minute | 117 | 105 | 92 | 78 | 63 |
